When initially disposing of wastes generated in buildings, many of the construction wastes are not sufficiently concentrated because of the lack of concentration of many building structures. Therefore, when setting up factories, the dispersibility of construction waste needs to be considered, so as to enhance the processing efficiency. Otherwise it will take a longer distance and time for delivery, which will not only increase transportation costs, but also lead to secondary pollution. Therefore, mobile recycled aggregate production mode will be the future development of construction waste crusher equipment an important direction. At the scene where Construction Waste is generated, people are able to treat the rubbish first. The treated aggregates are then transported to the Aggregate Depth Treatment Center and processed accordingly. This will not only reduce shipping costs, but also reduce its impact on the environment.
By the crusher, screening system, debris sorting device, conveyor and vibrating feeder, self-propelled functions together constitute a mobile construction garbage crusher. And, the deployment of agencies into action, we can say that this production line is moving
In the mobile crushing plant, crusher is the core component, crushing construction waste is its main task. Medium hardness materials are the main features of construction waste, with low viscosity and no excessive water requirement. Therefore, the equipment that must ensure the stone breaking needs to be applied in the construction waste recycling mobile crusher. In order to improve the performance of recycled aggregates, granular materials should be crushed to effectively reduce the content of flake materials and to ensure that the particles can be uniformly distributed. Therefore, we must control the performance, efficiency and material size of the crusher according to the corresponding standards and scope.
In order to produce high-quality recycled aggregate, if it is difficult to complete a crushing required, it is necessary to carry out secondary crushing, which requires the addition of screening system, the sieve of larger particles of concrete block, and then crusher In the transport, crushing again to ensure that it can effectively crush construction waste.
A lot of debris exists in the construction waste, especially a lot of waste iron wire, scrap steel materials exist in the reinforced concrete, therefore, need a debris sorting device is set to the mobile crusher, scrap wire, scrap steel pairs The impact of recycled aggregate aggregate performance is reduced.
If the crusher directly into the construction waste, this crusher will have a tremendous impact, if the long time to do so, it will result in uneven force, the normal operation of the equipment have an impact. Therefore, it is necessary to install a vibrating feeder before the crusher unit. The biggest advantage of vibrating feeder is to be able to feed evenly. After vibrating the material, move forward and slowly move in front of the crusher. If the size of the construction waste is small, it will fall in the interstices of the bars and play the role of sifting.
Tire and crawler travel agencies are two of the most important walking gear in mobile crushing plants. Tire walking mechanism to facilitate the common road to walk, turning a small radius, quickly settled in the site, equipment, high flexibility and save time. Crawler walking mechanism, can walk smoothly, with a lower ground pressure, can effectively adapt to wet and mountain environment. Usually for full hydraulic drive system applications, it is highly reliable, driving force.